3洞小净距隧道围岩压力计算方法

针对3洞小净距隧道围岩压力计算问题,基于普氏平衡拱理论,将围岩压力看作单洞隧道的基本压力与相邻隧道开挖引起的附加压力之和,提出适用于3洞小净距隧道的围岩压力计算方法;根据该计算方法研究不同岩柱厚度、开挖跨度和开挖高度对围岩压力的影响规律,并将该计算方法应用于确定八达岭长城站3洞小净距隧道围岩压力。结果表明:随着岩柱厚度的增加,围岩压力不断减小,当岩柱厚度达到某一值时,围岩压力与单洞隧道相同;岩柱厚度、边洞跨度和中洞高度变化影响整体围岩压力,中洞跨度和边洞高度仅影响各自单洞围岩压力;3洞小净距隧道的最优开挖顺序为"先边洞、后中洞",中洞围岩压力大于边洞,应力值最大点为中洞顶部。施工中应注意中洞围岩稳定,采取有效的措施对岩柱区域进行加固。     

基于实数遗传算法的列车优化操纵曲线研究

列车优化操纵是列车节能控制的关键问题，以列车运行动力学方程和牵引计算理论为基础，结合列车运行过程中的要求，构建以能耗、时分误差、限速等为目标的列车节能控制模型，采用实数遗传算法，通过Visual Basic编程对此问题进行求解。在已知列车编组的条件下，以DF4型内燃机车牵引客车、空气制动和燃油量曲线为基础，得到给定运行时间、距离条件下的优化操纵曲线，从而对司机操纵给出指导性意见。     

南京大胜关长江大桥CPⅢ点位随温度变化的模型研究

以京沪高铁南京大胜关长江大桥CPⅢ高精密测量为工程背景,经过坐标变换后计算得出各个点位的膨胀值,利用概率与统计理论分析处理,得到可用于建模的点对数据(ΔS,ΔT)。根据一定的假设条件,建立了测量点位的位移随环境温度变化的线性回归模型,从而得出大桥CPⅢ位置POS与温度T之间的关系。利用该模型修正并评价测量数据,结果表明其较差完全符合要求,区间预测模型可用。并编程实现了CPⅢ点位位置随环境温度变化的自动化预测,能够方便地为大桥的变形观测、定期复测和实际胀缩效果分析提供一定的参考。     

Haar小波变换在变速器齿轮故障诊断中的应用

推导和证明了Haar小波连续小波变换时间和尺度的周期性，指出这种周期性可以提取出信号中的周期成分，并且使谐波和冲击信号在时间-尺度域中有不同的图形特征。因此根据这些特性可以识别齿轮裂纹产生的冲击和刚度变化，仿真和汽车变速器齿轮故障分析验证了Haar小波变换的有效性和实用性。     

小波变换在管道泄漏点定位中的应用

当管道发生泄漏时，泄漏诱发的负压波传播到管道上下游监测点时会使该点压力信号幅值产生瞬态下降，利用小波变换模极大值检测压力信号的突变点，从而计算出管道泄漏诱发的负压波传播到上下游监测点的时间差。在MATLAB6．1软件环境下，以某次实验数据为例进行管道泄漏点定位研究。在计算过程中小波基函数选取为Haar小波，尺度水平为6，计算结果表明该方法可以计算出管道泄漏点处诱发的负压波传播到管道上游监测点的时间差，从而为准确定位泄漏点提供了基础。     

Large-scale evacuation network optimization: a bi-level control method with uncertain arterial demand

To improve the efficiency of large-scale evacuations, a network aggregation method and a bi-level optimization control method are proposed in this paper. The network aggregation method indicates the uncertain evacuation demand on the arterial sub-network and balances accuracy and efficiency by refining local road sub-networks. The bi-level optimization control method is developed to reconfigure the aggregated network from both supply and demand sides with contraflow and conflict elimination. The main purpose of this control method is to make the arterial sub-network to be served without congestion and interruption. Then, a corresponding bi-objective network flow model is presented in a static manner for an oversaturated network, and a Genetic Algorithm-based solution method is used to solve the evacuation problem. The numerical results from optimizing a city-scale evacuation network for a super typhoon justify the validity and usefulness of the network aggregation and optimization control methods.     

车辆隔热壁K值计算中空气层的处理方法

对轨道交通车辆多层复合结构的隔热壁进行隔热性能理论计算与仿真计算的对比,对隔热壁内部空气层的隔热性能进行分析。结论为:在车辆多层复合结构的隔热壁K值计算中,当空气层厚度大于一定厚度时,流体自然对流对隔热壁的隔热性能影响较大。利用多项式密度(Polynomial Denisity)和Boussinesq模型两种算法,对所得结论进行了验证。     

基于改进BP-GA方法的FPSO舷侧结构耐撞性能优化设计

基于遗传算法和ABAQUS参数化有限元仿真技术,对传统的BP-GA优化方法进行改进,并采用改进的BP-GA方法对浮式生产储油卸油装置(FPSO)舷侧结构的耐撞性能进行优化,以验证其可行性和准确性。结果表明,与传统的BP神经网络相比,经遗传算法优化的BP神经网络具有更高的预测精度和更强的泛化能力;改进的BP-GA优化方法可在结构减重的基础上进一步提高结构的耐撞性能,能较好地适用于复杂的FPSO舷侧结构耐撞性优化设计。采用的优化方法具有通用性,可为抗爆性能的优化设计提供参考。     

Highway voting system: Embracing a possible paradigm shift in traffic data acquisition

The integration of internet and mobile phones has opened the door to a new wave of utilizing private vehicles as probes not only for performance evaluation but for traffic control as well, gradually replacing the role of traffic surveillance systems as the dominant source of traffic data. To prepare for such a paradigm shift, one needs to overcome some key institutional barriers, in particular, the privacy issue. A Highway Voting System (HVS) is proposed to address this issue in which drivers provide link- and/or path-based vehicle data to the traffic management system in the form of “votes” in order to receive favorable service from traffic control. The proposed HVS offers a platform that links data from individual vehicles directly with traffic control. In the system, traffic control responds to voting vehicles in a way similar to the current system responding to prioritized vehicles and providing the requested services accordingly. We show in the paper that the proposed “voting” system can effectively resolve the privacy issue which often hampers traffic engineers from getting detailed data from drivers. Strategies to entice drivers into “voting” so as to increase the market penetration level under all traffic conditions are discussed. Though the focus of the paper is on addressing the institutional issues associated with data acquisition from individual vehicles, other research topics associated with the proposed system are identified. Two examples are given to demonstrate the impact of the proposed system on algorithm development and traffic control.     

Career development for women in maritime industry: organisation and socialisation perspectives

For centuries, the maritime industry has been a recognised place in society dominated solely by men, and even though there were women involved, they were mostly on the periphery. This research aims to fill the gap of women’s career development in this field, by investigating the relationships among the degree of organisational socialisation, women’s workplace culture, and the career development of women in the maritime workplace. The analyses are conducted with the structural equation model with 202 valid questionnaires. The results indicated that women’s workplace culture has a significantly negative relationship with the degree of organisational socialisation, and then in turn, it has a significantly positive relationship with women’s career development in the maritime industry. Finally, the results also indicate that the mediating effect of organisational socialisation existed between women’s workplace culture and women’s career development. According to the empirical analysis, this study makes conclusions as well as suggestions for the maritime enterprises as the reference for human resource management.